User`s guide

Prestige 128+ ISDN Router
7-4 Bridging Setup
The following table describes the bridging-specific parameters in the Remote
Node Profile and Network Layers menus.
Table 7-2 Remote Node Network Layers Menu Bridge Options
Field Description
Bridge
Make sure this field is set to Yes.
Edit IP/IPX/Bridge
Press the space bar to change it to Yes and press Enter] to go to the
Network Layer Options Menu.
Dial-On-Broadcast This field is necessary for your Prestige on the caller side LAN. When
set to Yes, any broadcasts coming from the LAN will trigger your
Prestige to make a call to this remote node. If it is set to No, your
Prestige will not make the outgoing call.
Ethernet Addr
Timeout (min)
In this field, enter the time (number of minutes) that you wish your
Prestige to retain the Ethernet Addr information in its internal tables
while the line is down. If this information is retained, your Prestige will
not have to recompile the tables when the line is brought back up.
Once you have completed filling in the Network Layer Options Menu, press [Enter] to return to
Menu 11.1. Then press [Enter] at the message [Press ENTER to Confirm…] to save your
configuration, or press [Esc] to cancel.