User`s guide

Omni.Net Lite User’s Guide
67 Chapter 3 Using AT Commands
3.5 Result Codes
A result code is the command response or the connect message to the computer connected to
the TA. The format of the result code is dependent on Xn and Vn commands. The result codes
are shown in the following table.
Table 19 Result Codes
NUMERIC FORM VERBOSE FORM BASIC (X0) EXTENDED (X1)
0OK VV
1 CONNECT V
2RING VV
3 NO CARRIER V V
4ERROR VV
18 CONNECT 9.6K V
21 CONNECT 19.2K V
23 CONNECT 38.4K V
26 CONNECT 57.6K V
27 CONNECT 115.2K V
31 CONNECT 230.4K V
33 CONNECT 64K V
34 CONNECT 128K V