User`s guide

Omni.Net Lite User’s Guide
Chapter 2 Using the Utility 46
Figure 17 Analog Port: Local DN and Options
The following table describes the labels in this screen.
Table 10 Analog Port: Local DN and Options
LABEL DESCRIPTION
Local Directory Number
Port 1
Port 2
Enter the ISDN phone number for voice calls in the Address field and the sub-
address in the SubAddress field.
CLIP and CLIR
Selection
CLIP (Calling Line Identity Presentation) displays the phone number of the
caller on the callee’s telephone. CLIR (Calling Line Identity Restriction) allows
the phone number to be hid.
Select CLIP (pass self DN to destination site) to allow the ISDN switch to
pass your phone number to the destination site.
Select CLIR (don’t pass self DN to destination site) and the CLIP service
will not be available.
Device type on analog
port
To enable the Type 2 service on either analog port, select Telephone with
Call Waiting caller ID device.
Otherwise, select Telephone, G3 Fax or Modem.