User`s guide

Omni.Net Lite User’s Guide
Chapter 2 Using the Utility 44
2 Enter the first number in the Address field beside Port 1 and the second number in the
Address field beside Port 2.
3 Click Submit to TA to save the changes back to the TA.
2.11.2 Caller ID
The caller ID (Caller Identification) information will display on the analog ports. Two caller
ID service types are supported by your TA.
2.11.2.1 Type 1: On-hook Caller ID Transmission
If the caller ID protocol uses DTMF (Dual Tone Multi-Frequency) signal, the caller ID
information includes the phone number and is sent prior to ringing.
If the caller ID protocol uses FSK (Frequency Shift Keying) signal, the phone number will be
sent during ringing.
The caller ID signaling type varies depending on the country.
2.11.2.2 Type 2: Off-hook Caller ID Transmission
The Type 2 service uses only FSK and shows call waiting caller ID. If the service is supported
and activated on your TA, the call waiting phone number is displayed when you are on the
phone.
Table 9 Caller ID signaling type
COUNTRY COUNTRY CODE CALLER ID SIGNALING TYPE RINGING PATTERN
Denmark 252 DTMF 1 Sec On, 2 Sec OFF
France 219 FSK 1 Sec On, 2 Sec OFF
German 237 FSK 1 Sec On, 2 Sec OFF
India 214 DTMF 1 Sec On, 2 Sec OFF
Ireland 235 FSK 0.4 Sec On, 0.2 Sec OFF,
0.4 Sec On, 2 Sec OFF
Italy 236 DTMF 1 Sec On, 2 Sec OFF
Netherland 253 DTMF 1 Sec On, 2 Sec OFF
Norway 245 FSK 1 Sec On, 2 Sec OFF
Portugal 220 DTMF 1 Sec On, 2 Sec OFF
Spain 213 DTMF 1 Sec On, 2 Sec OFF
Sweden 250 DTMF 1 Sec On, 2 Sec OFF
Switzerland 251 DTMF 1 Sec On, 2 Sec OFF
UK 249 FSK 0.4 Sec On, 0.2 Sec OFF,
0.4 Sec On, 2 Sec OFF
Other (default) 216 DTMF 1 Sec On, 2 Sec OFF