User's Manual

Chapter 5AP Mode
NWD2205 User’s Guide
81
5.4.1.2 WEP Encryption
Configure WEP security with these options.
Figure 57 Security Setting: WEP
The following table describes the labels in this screen.
Table 22 Security Setting: WEP
LABEL DESCRIPTION
Security typeSelect WEP to enable this encryption type.
Authentication
Type
Select an authentication method. Choices are OPEN and SHARED.
WEPSelect 64 bits or 128 bits for your WEP encryption type.
Transmit KeySelect a default WEP key to use for data encryption.
Note: This feature is not available in Windows Vista.
Pass PhraseIf you select this transmit key option, enter a passphrase of up to 32
case-sensitive printable characters.
As you enter the passphrase, the NWD2205 automatically generates
four different transmit keys and displays the first in the key field below.