User's Manual

Chapter 5AP Mode
NWD2205 User’s Guide
78
5.3 The Link Info Screen
When you enter AP Mode, the Link Info screen displays, showing the current
configuration and connection status of your NWD2205 access point.
Figure 55 Link Info
The following table describes the labels in this screen.
Table 20 Link Info
LABEL DESCRIPTION
Status
SSIDThis field displays the name that identifies your NWD2205 in the wire-
less LAN network.
Current
Channel
This field displays the radio channel the NWD2205 is currently using.
Transmis-
sion Rate
This field displays the current transmission rate of the NWD2205 in
megabits per second (Mbps).
SecurityThis field shows whether data encryption is activated (WEP, WPA,
WPA2, WPA-PSK or WPA2-PSK) or inactive (DISABLE).
MACThis field displays the MAC address of the NWD2205.
Output
Power
This field shows the strength of the NWD2205’s antenna gain or trans-
mission power.
Association ListThis table lists the wireless clients that are currently connected to the
NWD2205.
denotes a wireless client without wireless security.
denotes a wireless client with wireless security enabled.
MAC Addr This field displays the MAC addresses of a wireless client that is cur-
rently connected to the NWD2205.
RefreshClick Refresh to update this screen.