User's Manual

Chapter 4Station Mode
NWD2205 User’s Guide
68
4.6 The Adapter Screen
To set the other advanced features on the NWD2205, click the Adapter tab.
Figure 45 Adapter
The following table describes the labels in this screen.
Table 17 Adapter
LABEL DESCRIPTION
Adapter Setting
Power Saving
Mode
Select Maximum or Normal to save power. This forces the NWD2205
to go to sleep mode when it is not transmitting data.
When you select Off, the NWD2205 will never go to sleep mode.
At the time of writing, this field is not available in Windows Vista.
WMM QoSSelect this to enable Wi-fi MultiMedia Quality of Service on the
NWD2205.
At the time of writing, this field is not available in Windows Vista.
WPS (WiFi
Protected
Setup)
Select this to enable Wi-fi Protected Setup on the NWD2205.
PBC (Push
Button
Configuratio
n)
Select this to use the PBC (Push-Button Configuration) WPS mode.
When you use the PBC mode you do not use a PIN.
When you select this, the PBC (Push Button Configuration) screen
appears (see Section 4.6.1 on page 69).