User's Manual

Chapter 4Station Mode
NWD2205 User’s Guide
65
2 If you select the Infrastructure network type in the previous screen, skip to step
3. If you select the Ad-Hoc network type in the previous screen, a screen displays
as follows. Select a Channel number and Wireless Mode and click Next to
continue.
Note: To associate to an ad-hoc network, you must use the same channel as the peer
computer.
Figure 40 Profile: Wireless Settings
The following table describes the labels in this screen.
ScanClick Scan to search for available wireless devices within transmission
range.
SelectSelect an available wireless device in the table and click Select to add it
to this profile.
Whenever you activate this profile, the NWD2205 associates to the
selected wireless network only.
Table 15 Profile: Add a New Profile (continued)
LABEL DESCRIPTION
Table 16 Profile: Wireless Settings
LABEL DESCRIPTION
Wireless
Settings
ChannelSelect a channel number from the drop-down list box. To associate to
an ad-hoc network, you must use the same channel as the peer
computer.