User's Manual

Chapter 4Station Mode
NWD2205 User’s Guide
64
1 Click Add in the Profile screen. An Add New Profile screen displays as shown
next.
Figure 39 Profile: Add a New Profile
The following table describes the labels in this screen.
Table 15 Profile: Add a New Profile
LABEL DESCRIPTION
Add New Profile
Profile NameEnter a descriptive name in this field.
SSIDSelect an available wireless device in the Scan Info table and click
Select, or enter the SSID of the wireless device to which you want to
associate in this field manually. Otherwise, enter Any to have the
NWD2205 associate to any AP or roam between any infrastructure
wireless networks.
Network TypeSelect Infrastructure to associate to an AP. Select Ad-Hoc to
associate to a peer computer.
NextClick Next to go to the next screen.
ExitClick Exit to go back to the previous screen without saving.
Scan InfoThis table displays the information of the available wireless networks
within the transmission range.
,
,
or
denotes that the wireless device is in infrastructure mode and
the wireless security is activated.
denotes that the wireless device is in infrastructure mode but the
wireless security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the
wireless security is activated.
denotes that the wireless device is in Ad-Hoc mode but the
wireless security is deactivated.
SSIDThis field displays the SSID (Service Set IDentifier) of each AP or peer
device.