User's Manual

Chapter 4Station Mode
NWD2205 User’s Guide
56
4.4.1.2 WEP Encryption
Configure WEP security in this screen.
Figure 33 Security Setting: WEP
The following table describes the labels in this screen.
NextClick Next to confirm your selections and advance to the Security
Settings screen that corresponds to the one you select here.
ExitClick Exit to return to the Site Survey screen without saving.
Table 8 Security Setting: WEP (continued)
LABEL DESCRIPTION
Table 9 Security Setting: WEP
LABEL DESCRIPTION
Security
Settings
WEPSelect 64 bits or 128 bits to activate WEP encryption and then fill in
the related fields.
Authentication
Type
Select an authentication method. Choices are OPEN and SHARED.
Refer to Section 3.3.1.1.2 on page 40 for more information.
Pass PhraseEnter a passphrase of up to 32 case-sensitive printable characters. As
you enter the passphrase, the NWD2205 automatically generates four
different WEP keys and displays the first in the key field below. Refer to
Section 3.3.1.1.1 on page 39 for more information.
Transmit KeySelect a default WEP key to use for data encryption. The key displays in
the adjacent field.