User's Manual

Chapter 4Station Mode
NWD2205 User’s Guide
55
4.4.1 Security Settings
When you configure the NWD2205 to connect to a network with wireless security
activated and the security settings are disabled on the NWD2205, the screen
varies according to the encryption method used by the selected network.
4.4.1.1 Security Type Selection
When you choose to connect to a network that has security, you are presented
with is a security selection screen. Choose the security of the network you are
attempting to join.
Figure 32 Security Setting Selection
The following table describes the labels in this screen.
Network Type This field displays the network type (Infrastructure or Ad Hoc) of the
wireless device.
ChannelThis field displays the channel number used by each wireless device.
SecurityThis field shows whether data encryption is activated (WEP, WPA,
WPA-PSK, WPA2, WPA2-PSK or 802.1x) or inactive (DISABLE).
MAC address This field displays the MAC address of the wireless device.
Surveyed at This field displays the time when the wireless device was scanned.
Table 7 Site Survey (continued)
LABEL DESCRIPTION
Table 8 Security Setting: WEP
LABEL DESCRIPTION
Security TypeSelect the security type that matches the security setting of the
network you’re trying to join.
The options are: DISABLE, WEP, WPA, WPA2, WPA-PSK, WPA2-
PSK, and 802.1x.
BackClick Back to go to the Site Survey screen to select and connect to
another network.