User`s guide

Chapter 5 Easy Mode

NBG6716 User’s Guide

The following table describes the labels in this screen.

5.7 Status Screen in Easy Mode

In the Network Map screen, click Status to view read-only information about the NBG6716.

Figure 31 Status Screen in Easy Mode

The following table describes the labels in this screen.

Table 17 Wireless Security: WPS

LABEL DESCRIPTION

Wireless Security Click this to go back to the Wireless Security screen.

WPS Create a secure wireless network simply by pressing a button.

The NBG6716 scans for a WPS-enabled device within the range and performs wireless

security information synchronization.

Note: After you click the WPS button on this screen, you have to press a similar button in

the wireless station utility within 2 minutes. To add the second wireless station, you

have to press these buttons on both device and the wireless station again after the

first 2 minutes.

Identification Number) in the NBG6716’s interface and pushing this button.

Type the same PIN number generated in the wireless station’s utility. Then click Register

to associate to each other and perform the wireless security information synchronization.

Exit Click Exit to close this screen.

Table 18 Status Screen in Easy Mode

ITEM DESCRIPTION

Name This is the name of the NBG6716 in the network. You can change this in the

Maintenance > General screen in Section 23.3 on page 181.

Time This is the current system date and time.

The date is in YYYY:MM:DD (Year-Month-Day) format. The time is in HH:MM:SS

(Hour:Minutes:Seconds) format.

WAN IP This is the IP address of the WAN port.

MAC Address This is the MAC address of the NBG6716.