User`s guide

Chapter 5 Easy Mode
NBG6716 User’s Guide
44
5.6.5 Wireless Security
Use this screen to configure security for your the wireless LAN. You can enter the SSID and select
the wireless security mode in the following screen.
Note: You can enable the wireless function of your NBG6716 by first turning on the switch
in the back panel.
Figure 29 Wireless Security
Subnet Mask Enter the IP subnet mask in this field.
Gateway IP
Address
Enter the gateway IP address in this field.
The following fields are available if you select PPPoE.
Get
automatically
from ISP
Select this radio button if your ISP did not assign you a fixed IP address.
Use Fixed IP
Address
Select this radio button, provided by your ISP to give the NBG6716 a fixed, unique IP
address.
PPP Username Type the user name given to you by your ISP.
PPP Password Type the password associated with the user name above.
My WAN IP
Address
Type the name of your service provider.
Cancel Click Cancel to close this screen.
Apply Click Apply to save your changes back to the NBG6716.
Table 15 Internet Setting (continued)
LABEL DESCRIPTION