User`s guide

Chapter 5 Easy Mode
NBG6716 User’s Guide
38
Figure 20 Easy Mode: Status Screen
5.2 What You Can Do
You can do the following in this mode:
•Use the Navigation Panel to opt out of the Easy Mode (Section 5.4 on page 39).
•Use the Network Map screen to check whether your NBG6716 is connected to the Internet or
any networking devices and view the transmission speed between them (Section 5.5 on page
39).
•Use the Control Panel to configure and enable NBG6716 features, including wireless scheduling,
wireless security, content filtering, firewall and so on (Section 5.6 on page 40).
•Use the Status Screen to view read-only information about the NBG6716, including the WAN IP,
MAC address of the NBG6716, the firmware version and wireless settigns (Section 5.7 on page
46).
5.3 What You Need to Know
Between the different device modes, the Control Panel (Section 5.6 on page 40) changes
depending on which features are applicable to the mode:
• Router Mode: All Control Panel features are available.
• Access Point Mode: Only Power Saving and Wireless Security are available.
Control Panel
Status Screen
Go to
Network
Map
Screen
Navigation Panel