User`s guide

NBG6716 User’s Guide 161
CHAPTER 20
Remote Management
20.1 Overview
This chapter provides information on the Remote Management screens.
Remote Management allows you to manage your NBG6716 from a remote location through the
following interfaces:
•LAN and WAN
•LAN only
•WAN only
Note: The NBG6716 is managed using the Web Configurator.
20.2 What You Can Do in this Chapter
•Use the WWW screen to define the interface/s from which the NBG6716 can be managed
remotely using the web and specify a secure client that can manage the NBG6716 (Section 20.4
on page 162).
•Use the Telnet screen to define the interface/s from which the NBG6716 can be managed
remotely using Telnet service and specify a secure client that can manage the NBG6716 (Section
20.5 on page 163).
•Use the Wake On LAN screen to enable Wake on LAN and remotely turn on a device on the local
network (Section 20.6 on page 163).
20.3 What You Need to Know
Remote management over LAN or WAN will not work when:
1 The IP address in the Secured Client IP Address field (Section 20.4 on page 162) does not match
the client IP address. If it does not match, the NBG6716 will disconnect the session immediately.
2 There is already another remote management session. You may only have one remote
management session running at one time.
3 There is a firewall rule that blocks it.