User`s guide
Table Of Contents
- User’s Guide
- Copyright
- Certifications
- Safety Warnings
- ZyXEL Limited Warranty
- Customer Support
- Table of Contents
- List of Figures
- List of Tables
- Preface
- Getting Started
- Tutorial
- Wireless LAN Network
- Wireless Configuration
- Maintenance
- Troubleshooting
- Product Specifications
- Management with Wireless Zero Configuration
- Wireless Security
- Setting up Your Computer’s IP Address
- Index
ZyXEL NWD-370N User’s Guide
20 Chapter 1 Getting Started
The following table describes the NWD-370N.
The following table describes the operation of the LEDs on the device.
1.2 Application Overview
This section describes some network applications for the NWD-370N. You can either set the
network type to Infrastructure and connect to an AP or use Ad-Hoc mode and connect to a
peer computer (another wireless device in Ad-Hoc mode).
1.2.0.1 Infrastructure
To connect to a network via an access point (AP), set the NWD-370N network type to
Infrastructure. Through the AP, you can access the Internet or the wired network behind the
AP.
Table 1 External View
LABEL DESCRIPTION
A Removable antennas
B LEDs (lights)
C PCI connector
Table 2 NWD-370N LEDs
STATE DESCRIPTION
The LEDs are off The NWD-370N is not receiving power.
The LEDs are blinking
alternately.
The NWD-370N is receiving power and is not connected to a
wireless network.
The LEDs are blinking
simultaneously and regularly.
The NWD-370N is receiving power and is connected to a wireless
network.
The LEDs are blinking
simultaneously and irregularly.
The NWD-370N is receiving power, is connected to a wireless
network and is sending or receiving data.