NWD-370N Draft 802.11n Wireless PCI Adapter User’s Guide Version 1.
ZyXEL NWD-370N User’s Guide Copyright Copyright © 2006 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation.
ZyXEL NWD-370N User’s Guide Certifications Federal Communications Commission (FCC) Interference Statement The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operations. This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
ZyXEL NWD-370N User’s Guide 依據 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用 者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現 有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍 受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 Notices Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device has been designed for the WLAN 2.
ZyXEL NWD-370N User’s Guide Safety Warnings For your safety, be sure to read and follow all warning notices and instructions. • Do NOT use this product near water, for example, in a wet basement or near a swimming pool. • Do NOT expose your device to dampness, dust or corrosive liquids. • Do NOT store things on the device. • Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning. • Connect ONLY suitable accessories to the device.
ZyXEL NWD-370N User’s Guide ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two years from the date of purchase.
ZyXEL NWD-370N User’s Guide Customer Support Please have the following information ready when you contact customer support. • • • • Product model and serial number. Warranty Information. Date that you received your device. Brief description of the problem and the steps you took to solve it. METHOD SUPPORT E-MAIL TELEPHONE WEB SITE FAX FTP SITE REGULAR MAIL LOCATION CORPORATE HEADQUARTERS (WORLDWIDE) COSTA RICA CZECH REPUBLIC DENMARK FINLAND SALES E-MAIL support@zyxel.com.
ZyXEL NWD-370N User’s Guide METHOD SUPPORT E-MAIL TELEPHONE WEB SITE SALES E-MAIL FAX FTP SITE support@zyxel.no +47-22-80-61-80 www.zyxel.no sales@zyxel.no +47-22-80-61-81 ZyXEL Communications A/S Nils Hansens vei 13 0667 Oslo Norway www.pl.zyxel.com ZyXEL Communications ul. Okrzei 1A 03-715 Warszawa Poland www.zyxel.ru ZyXEL Russia Ostrovityanova 37a Str. Moscow, 117279 Russia www.zyxel.es ZyXEL Communications Arte, 21 5ª planta 28033 Madrid Spain www.zyxel.
ZyXEL NWD-370N User’s Guide 10 Customer Support
ZyXEL NWD-370N User’s Guide Table of Contents Copyright .................................................................................................................. 3 Certifications ............................................................................................................ 4 Safety Warnings ....................................................................................................... 6 ZyXEL Limited Warranty....................................................................
ZyXEL NWD-370N User’s Guide 3.2.1.2 IEEE 802.1x ....................................................................................33 3.2.1.3 WPA and WPA2 ..............................................................................33 Chapter 4 Wireless Configuration .......................................................................................... 35 4.1 ZyXEL Utility Screen Summary .........................................................................35 4.2 The Link Info Screen .............
ZyXEL NWD-370N User’s Guide List of Figures Figure 1 The NWD-370N ....................................................................................... 19 Figure 2 Application: Infrastructure ....................................................................... 21 Figure 3 Application: Ad-Hoc ................................................................................ 21 Figure 4 ZyXEL Utility: System Tray Icon .............................................................. 22 Figure 5 Enable WZC ..
ZyXEL NWD-370N User’s Guide Figure 39 Windows XP SP2: System Tray Icon ..................................................... 60 Figure 40 Windows XP SP2: Wireless Network Connection Status ....................... 60 Figure 41 Windows XP SP1: Wireless Network Connection Status ....................... 61 Figure 42 Windows XP SP2: Wireless Network Connection .................................. 61 Figure 43 Windows XP SP1: Wireless Network Connection Properties ................
ZyXEL NWD-370N User’s Guide List of Tables Table 1 External View ............................................................................................ 20 Table 2 NWD-370N LEDs ..................................................................................... 20 Table 3 ZyXEL Utility: System Tray Icon ............................................................... 22 Table 4 ZyXEL Utility Menu Summary ................................................................... 35 Table 5 Link Info ........
ZyXEL NWD-370N User’s Guide 16 List of Tables
ZyXEL NWD-370N User’s Guide Preface Congratulations on your purchase of the NWD-370N Draft 802.11n Wireless PCI Adapter. Your NWD-370N plugs into a PCI slot in your computer and allows you to access wireless networks. Your NWD-370N is easy to install and configure. About This User's Guide This manual is designed to guide you through the configuration of your NWD-370N for its various applications. Related Documentation • Supporting Disk Refer to the included CD for support documents.
ZyXEL NWD-370N User’s Guide Graphics Icons Key Wireless Access Point Computer Notebook Computer Server Modem or Router Wireless Signal Internet Cloud 18 Preface
ZyXEL NWD-370N User’s Guide CHAPTER 1 Getting Started This chapter introduces the NWD-370N and prepares you to use the ZyXEL utility. The ZyXEL utility is a tool that helps you configure your NWD-370N. 1.1 About Your NWD-370N The NWD-370N is an IEEE 802.11n draft compliant wireless LAN adapter, using MIMO (Multiple-In, Multiple-Out) antenna technology to deliver high-speed wireless networking. It can also connect to IEEE 802.11b/g wireless networks. See the appendix for detailed product specifications.
ZyXEL NWD-370N User’s Guide The following table describes the NWD-370N. Table 1 External View LABEL DESCRIPTION A Removable antennas B LEDs (lights) C PCI connector The following table describes the operation of the LEDs on the device. Table 2 NWD-370N LEDs STATE DESCRIPTION The LEDs are off The NWD-370N is not receiving power. The LEDs are blinking alternately. The NWD-370N is receiving power and is not connected to a wireless network. The LEDs are blinking simultaneously and regularly.
ZyXEL NWD-370N User’s Guide Figure 2 Application: Infrastructure 1.2.0.2 Ad-Hoc To set up a small independent wireless workgroup without an AP, use Ad-Hoc. Ad-Hoc does not require an AP or a wired network. Two or more wireless clients communicate directly with each other.
ZyXEL NWD-370N User’s Guide 1.3 NWD-370N Hardware and Utility Installation Follow the instructions in the Quick Start Guide to install the ZyXEL utility and make hardware connections. 1.3.1 ZyXEL Utility Icon After you install and start the ZyXEL utility, an icon for the ZyXEL utility appears in the system tray. Note: The ZyXEL utility system tray icon displays only when the NWD-370N is installed properly. When you use the ZyXEL utility, it automatically disables Wireless Zero Configuration (WZC).
ZyXEL NWD-370N User’s Guide Figure 5 Enable WZC Refer to the appendices for information on how to use WZC to manage the NWD-370N. To reactivate the ZyXEL utility, double-click the ( ) icon on your desktop or click Start, (All) Programs, ZyXEL NWD-370N Wireless Adapter Utility, ZyXEL NWD-370N Wireless Adapter Software. 1.4.2 Accessing the ZyXEL Utility Double-click on the ZyXEL wireless LAN utility icon in the system tray to open the ZyXEL utility.
ZyXEL NWD-370N User’s Guide 24 Chapter 1 Getting Started
ZyXEL NWD-370N User’s Guide CHAPTER 2 Tutorial The following sections show you how to join a wireless network using the ZyXEL utility, as in the following diagrams. The wireless client is labeled C and the access point is labeled AP. Figure 6 Infrastructure Network There are three ways to connect the wireless client (the NWD-370N) to a network. • Configure nothing and leave the wireless client to automatically scan for and connect to any available network that has no wireless security configured.
ZyXEL NWD-370N User’s Guide Figure 7 ZyXEL Utility: Site Survey 2 The wireless client automatically searches for available wireless networks. Click Scan if you want to search again. If no entry displays in the Available Network List, that means there is no wireless network available within range. Make sure the AP or peer computer is turned on, or move the wireless client closer to the AP or peer computer. See Table 4.3 on page 37 for detailed field descriptions.
ZyXEL NWD-370N User’s Guide Figure 9 ZyXEL Utility: Confirm Save 6 The ZyXEL utility returns to the Link Info screen while it connects to the wireless network using your settings. When the wireless link is established, the ZyXEL utility icon in the system tray turns green and the Link Info screen displays details of the active connection. Check the network information in the Link Info screen to verify that you have successfully connected to the selected network.
ZyXEL NWD-370N User’s Guide This example illustrates how to set up a profile and connect the wireless client to an access point configured for WPA-PSK security. In this example, the AP’s SSID is “SSID_Example3” and its pre-shared key is “ThisismyWPA-PSKpre-sharedkey”. You have chosen the profile name “PN_Example3”. 1 Open the ZyXEL utility and click the Profile tab to open the screen as shown. Click Add to configure a new profile. Figure 11 ZyXEL Utility: Profile 2 The Add New Profile screen appears.
ZyXEL NWD-370N User’s Guide Figure 13 ZyXEL Utility: Profile Security 5 This screen varies depending on the encryption method you selected in the previous screen. In this example, enter the pre-shared key and leave the encryption type at the default setting. Figure 14 ZyXEL Utility: Profile Encryption 6 Verify the profile settings in the ready-only screen. Click Save to save and go to the next screen. Figure 15 ZyXEL Utility: Profile Confirm Save 7 Click Activate Now to use the new profile immediately.
ZyXEL NWD-370N User’s Guide Note: Only one profile can be activated and used at any given time. Figure 16 ZyXEL Utility: Profile Activate 8 When you activate the new profile, the ZyXEL utility goes to the Link Info screen while it connects to the AP using your settings. When the wireless link is established, the ZyXEL utility icon in the system tray turns green and the Link Info screen displays details of the active connection.
ZyXEL NWD-370N User’s Guide CHAPTER 3 Wireless LAN Network This chapter provides background information on wireless LAN networks. 3.1 Wireless LAN Overview The following figure provides an example of a wireless network with an AP. See Figure 3 on page 21 for an Ad Hoc network example. Figure 17 Example of a Wireless Network The wireless network is the part in the blue circle. In this wireless network, devices A and B are called wireless clients.
ZyXEL NWD-370N User’s Guide • Every device in the same wireless network must use security compatible with the AP or peer computer. Security stops unauthorized devices from using the wireless network. It can also protect the information that is sent in the wireless network. 3.2 Wireless LAN Security Wireless LAN security is vital to your network to protect wireless communications.
ZyXEL NWD-370N User’s Guide Your NWD-370N allows you to configure up to four 64-bit, 128-bit or 152-bit WEP keys. Only one key is used as the default key at any one time. 3.2.1.1.2 Authentication Type The IEEE 802.11b/g standard describes a simple authentication method between the wireless stations and AP. Three authentication types are defined: Auto, Open and Shared. • Open mode is implemented for ease-of-use and when security is not an issue.
ZyXEL NWD-370N User’s Guide Both WPA and WPA2 improve data encryption by using Temporal Key Integrity Protocol (TKIP), Message Integrity Check (MIC) and IEEE 802.1x. WPA and WPA2 use Advanced Encryption Standard (AES) in the Counter mode with Cipher block chaining Message authentication code Protocol (CCMP) to offer stronger encryption than TKIP. If both an AP and the wireless clients support WPA2 and you have an external RADIUS server, use WPA2 for stronger data encryption.
ZyXEL NWD-370N User’s Guide CHAPTER 4 Wireless Configuration This chapter shows you how to configure your NWD-370N. 4.1 ZyXEL Utility Screen Summary This section describes the ZyXEL utility screens. Figure 18 ZyXEL Utility Menu Summary The following table describes the menus. Table 4 ZyXEL Utility Menu Summary TAB DESCRIPTION Link Info Use this screen to see your current connection status, configuration and data rate statistics.
ZyXEL NWD-370N User’s Guide Figure 19 Link Info The following table describes the labels in this screen. Table 5 Link Info LABEL DESCRIPTION Wireless Network Status Profile Name This is the name of the profile you are currently using. Network Name (SSID) The SSID identifies the wireless network to which a wireless station is associated. This field displays the name of the wireless device to which the NWD-370N is associated.
ZyXEL NWD-370N User’s Guide Table 5 Link Info (continued) LABEL DESCRIPTION Trend Chart Click this button to display the real-time statistics of the data rate in kilobits per second (Kbps). Signal Strength The status bar shows the strength of the signal. The signal strength mainly depends on the antenna output power and the distance between your NWD-370N and the AP or peer computer. Link Quality The status bar shows the quality of wireless connection.
ZyXEL NWD-370N User’s Guide Figure 21 Site Survey The following table describes the labels in this screen. Table 7 Site Survey LABEL DESCRIPTION Available Network List Click a column heading to sort the entries. , , or 38 denotes that the wireless device is in infrastructure mode and the wireless security is activated. denotes that the wireless device is in infrastructure mode but the wireless security is deactivated.
ZyXEL NWD-370N User’s Guide 4.3.1 Security Settings When you configure the NWD-370N to connect to a network with wireless security activated and the security settings are disabled on the NWD-370N, the screen varies according to the encryption method used by the selected network. 4.3.1.1 WEP Encryption Figure 22 Security Setting: WEP The following table describes the labels in this screen.
ZyXEL NWD-370N User’s Guide Table 8 Security Setting: WEP (continued) LABEL DESCRIPTION Key x (where x is a Select this option if you want to manually enter the WEP keys. Enter the WEP key number between 1 in the field provided. and 4) If you select 64 Bits in the WEP field. Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for example, 11AA22BB33) for HEX key type.
ZyXEL NWD-370N User’s Guide The following table describes the labels in this screen. Table 9 Security Setting: WPA-PSK/WPA2-PSK LABEL DESCRIPTION Encryption Type The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses a simple common password, instead of user-specific credentials. Select the encryption type (TKIP or AES) for data encryption. Refer to Section 3.2.1.3 on page 33 for more information.
ZyXEL NWD-370N User’s Guide Table 10 Security Setting: WPA/WPA2 LABEL DESCRIPTION Password This field is not available when you select TLS in the Authentication Type field. Enter the password associated with the user name above. Certificate This field is only available when you select TLS in the Authentication Type field. Click Browse to select a certificate. Note: You must first have a wired connection to a network and obtain the certificate(s) from a certificate authority (CA).
ZyXEL NWD-370N User’s Guide The following table describes the labels in this screen. Table 11 Security Settings: IEEE 802.1x LABEL DESCRIPTION Authentication Type The type of authentication you use depends on the RADIUS server or AP. Select an authentication method from the drop down list. Options are TLS and PEAP. Login Name Enter a user name. This is the user name that you or an administrator set up on a RADIUS server.
ZyXEL NWD-370N User’s Guide Figure 26 Confirm Save Screen The following table describes the labels in this screen. Table 12 Confirm Save Screen LABEL DESCRIPTION Security Setting Network Name (SSID) This field displays the SSID previously entered. Network Type This field displays the network type (Infrastructure or Ad-Hoc) of the wireless device. Network Mode This field displays the wireless standard (802.11b, 802.11g or 802.11n) used by the selected wireless device.
ZyXEL NWD-370N User’s Guide The default profile is a profile that allows you to connect to any SSID that has no security enabled. Click the Profile tab in the ZyXEL utility program to display the Profile screen as shown next. The profile function allows you to save the wireless network settings in this screen, or use one of the pre-configured network profiles. Figure 27 Profile The following table describes the labels in this screen.
ZyXEL NWD-370N User’s Guide Table 13 Profile (continued) LABEL DESCRIPTION Profile Info The following fields display detailed information of the selected profile in the Profile List table. Network Type This field displays the network type (Infrastructure or Ad-Hoc) of the profile. Network Mode This field displays the wireless standard (802.11b, 802.11g or 802.11n) used by the selected wireless device. Channel This field displays the channel number used by the profile.
ZyXEL NWD-370N User’s Guide Table 14 Profile: Add a New Profile (continued) LABEL DESCRIPTION Network Type Select Infrastructure to associate to an AP. Select Ad-Hoc to associate to a peer computer. Next Click Next to go to the next screen. Exit Click Exit to go back to the previous screen without saving. Scan Info This table displays the information of the available wireless networks within the transmission range.
ZyXEL NWD-370N User’s Guide The following table describes the labels in this screen. Table 15 Profile: Wireless Settings LABEL DESCRIPTION Wireless Settings Wireless Mode This is the wireless standard the NWD-370N uses. In Ad-Hoc mode, you can use only 802.11g. Channel Select a channel number from the drop-down list box. To associate to an ad-hoc network, you must use the same channel as the peer computer.
ZyXEL NWD-370N User’s Guide Figure 31 Profile: Security Settings 5 This read-only screen shows a summary of the new profile settings. Verify that the settings are correct. Click Save to save and go to the next screen. Click Back to return to the previous screen. Otherwise, click Exit to go back to the Profile screen without saving. Figure 32 Profile: Confirm New Settings 6 To use this network profile, click the Activate Now button. Otherwise, click the Activate Later button.
ZyXEL NWD-370N User’s Guide Figure 33 Profile: Activate the Profile 4.5 The Adapter Screen To set the other advanced features on the NWD-370N, click the Adapter tab. Figure 34 Adapter The following table describes the labels in this screen. Table 16 Adapter LABEL DESCRIPTION Adapter Setting Preamble Type Preamble is used to signal that data is coming to the receiver. Select the preamble type that the AP uses.
ZyXEL NWD-370N User’s Guide Table 16 Adapter (continued) LABEL DESCRIPTION Power Saving Mode Select Maximum Power Save or Fast Power Save to save power (especially for notebook computers). This forces the NWD-370N to go to sleep mode when it is not transmitting data. When you select Continuous Access Mode, the NWD-370N will never go to sleep mode. Save Click Save to save the changes to the NWD-370N and return to the Link Info screen.
ZyXEL NWD-370N User’s Guide 52 Chapter 4 Wireless Configuration
ZyXEL NWD-370N User’s Guide CHAPTER 5 Maintenance This chapter describes how to uninstall or upgrade the ZyXEL utility. 5.1 The About Screen The About screen displays driver and utility version numbers of the NWD-370N. To display the screen as shown below, click the about ( ) button. Figure 35 About The following table describes the read-only fields in this screen. Table 17 About LABEL DESCRIPTION Driver Version This field displays the version number of the NWD-370N driver.
ZyXEL NWD-370N User’s Guide 2 When prompted, click OK or Yes to remove the driver and the utility software. Figure 36 Uninstall: Confirm 3 Click Finish to complete uninstalling the software and restart the computer when prompted. Figure 37 Uninstall: Finish 5.3 Upgrading the ZyXEL Utility Note: Before you uninstall the ZyXEL utility, take note of your current wireless configurations. To perform the upgrade, follow the steps below.
ZyXEL NWD-370N User’s Guide CHAPTER 6 Troubleshooting This chapter covers potential problems and the possible remedies. After each problem description, some instructions are provided to help you to diagnose and to solve the problem. 6.1 Problems Starting the ZyXEL Utility Table 18 Troubleshooting Starting ZyXEL Utility PROBLEM CORRECTIVE ACTION Cannot start the ZyXEL Wireless LAN utility Make sure the NWD-370N is properly inserted and the LEDs are on.
ZyXEL NWD-370N User’s Guide 6.3 Problems Communicating With Other Computers Table 20 Troubleshooting Communication Problems PROBLEM CORRECTIVE ACTION The computer with In Infrastructure Mode the NWD-370N • Make sure that the AP and the associated computers are turned on and installed cannot working properly. communicate with • Make sure the NWD-370N computer and the associated AP use the same the other SSID. computer(s).
ZyXEL NWD-370N User’s Guide APPENDIX A Product Specifications Table 21 Product Specifications PHYSICAL AND ENVIRONMENTAL Product Name NWD-370N Draft 802.11n Wireless PCI Adapter Interface PCI bus 2.3 Standards IEEE 802.11b IEEE 802.11g IEEE 802.
ZyXEL NWD-370N User’s Guide Table 21 Product Specifications (continued) RX Sensitivity Tolerance: +/- 1 dBm IEEE 802.11b: -84 dBm at 11 Mbps IEEE 802.11g: -72 dBm at 54 Mbps IEEE 802.11n (draft): -70 dBm at HT20 & HT40 SOFTWARE SPECIFICATIONS 58 Device Drivers Windows 2000, Windows XP Security 64/128/152-bit WEP WPA/WPA-PSK/WPA2/WPA2-PSK IEEE 802.1x Roaming IEEE 802.
ZyXEL NWD-370N User’s Guide APPENDIX B Management with Wireless Zero Configuration This appendix shows you how to manage your NWD-370N using the Windows XP wireless zero configuration tool. Be sure you have the Windows XP service pack 2 installed on your computer. Otherwise, you should at least have the Windows XP service pack 1 already on your computer and download the support patch for WPA from the Microsoft web site. Windows XP SP2 screen shots are shown unless otherwise specified.
ZyXEL NWD-370N User’s Guide Connecting to a Wireless Network 1 Double-click the network icon for wireless connections in the system tray to open the Wireless Network Connection Status screen. Figure 39 Windows XP SP2: System Tray Icon The type of the wireless network icon in Windows XP SP2 indicates the status of the NWD370N. Refer to the following table for details. Table 22 Windows XP SP2: System Tray Icon ICON DESCRIPTION The NWD-370N is connected to a wireless network.
ZyXEL NWD-370N User’s Guide Windows XP SP1: In the Wireless Network Connection Status screen, click Properties and the Wireless Networks tab to open the Wireless Network Connection Properties screen. Figure 41 Windows XP SP1: Wireless Network Connection Status 3 Windows XP SP2: Click Refresh network list to reload and search for available wireless devices within transmission range. Select a wireless network in the list and click Connect to join the selected wireless network.
ZyXEL NWD-370N User’s Guide The following table describes the icons in the wireless network list. Table 23 Windows XP SP2: Wireless Network Connection ICON DESCRIPTION This denotes that wireless security is activated for the wireless network. This denotes that this wireless network is your preferred network. Ordering your preferred networks is important because the NWD-370N tries to associate to the preferred network first in the order that you specify.
ZyXEL NWD-370N User’s Guide If there is no security activated for the selected wireless network, a warning screen appears. Click Connect Anyway if wireless security is not your concern.
ZyXEL NWD-370N User’s Guide Figure 46 Windows XP: Wireless (network) properties: Association The following table describes the labels in this screen. Table 25 Windows XP: Wireless (network) properties: Association LABEL DESCRIPTION Network name (SSID) This field displays the SSID (Service Set IDentifier) of each wireless network. Network Authentication This field automatically shows the authentication method (Share, Open, WPA or WPA-PSK) used by the selected network.
ZyXEL NWD-370N User’s Guide Authentication Click the Authentication tab in the Wireless (network) properties screen to display the screen shown next. The fields on this screen are grayed out when the network is in Ad-Hoc mode or data encryption is disabled. Figure 47 Windows XP: Wireless (network) properties: Authentication The following table describes the labels in this screen. Table 26 Windows XP: Wireless (network) properties: Authentication LABEL DESCRIPTION Enable IEEE 802.
ZyXEL NWD-370N User’s Guide Authentication Properties Select an EAP authentication type in the Wireless (network) properties: Authentication screen and click the Properties button to display the following screen. Protected EAP Properties Figure 48 Windows XP: Protected EAP Properties The following table describes the labels in this screen.
ZyXEL NWD-370N User’s Guide Table 27 Windows XP: Protected EAP Properties LABEL DESCRIPTION Enable Fast Reconnect Select the check box to automatically reconnect to the network (without reauthentication) if the wireless connection goes down. OK Click OK to save your changes. Cancel Click Cancel to leave this screen without saving any changes you may have made.
ZyXEL NWD-370N User’s Guide Table 28 Windows XP: Smart Card or other Certificate Properties LABEL DESCRIPTION Use a different user name for the connection: Select the check box to use a different user name when the user name in the smart card or certificate is not the same as the user name in the domain that you are logged on to. OK Click OK to save your changes. Cancel Click Cancel to leave this screen without saving any changes you may have made.
ZyXEL NWD-370N User’s Guide Figure 51 Windows XP SP1: Wireless Networks: Preferred Networks 2 Whenever the NWD-370N tries to connect to a new network, the new network is added in the Preferred networks table automatically. Select a network and click Move up or Move down to change it's order, click Remove to delete it or click Properties to view the security, authentication or connection information of the selected network. Click Add to add a preferred network into the list manually.
ZyXEL NWD-370N User’s Guide 70 Appendix B
ZyXEL NWD-370N User’s Guide APPENDIX C Wireless Security Types of EAP Authentication This section discusses some popular authentication types: EAP-MD5, EAP-TLS, EAP-TTLS, PEAP and LEAP. Your wireless LAN device may not support all authentication types. EAP (Extensible Authentication Protocol) is an authentication protocol that runs on top of the IEEE 802.1x transport mechanism in order to support multiple types of user authentication.
ZyXEL NWD-370N User’s Guide EAP-TLS (Transport Layer Security) With EAP-TLS, digital certifications are needed by both the server and the wireless stations for mutual authentication. The server presents a certificate to the client. After validating the identity of the server, the client sends a different certificate to the server. The exchange of certificates is done in the open before a secured tunnel is created. This makes user identity vulnerable to passive attacks.
ZyXEL NWD-370N User’s Guide For added security, certificate-based authentications (EAP-TLS, EAP-TTLS and PEAP) use dynamic keys for data encryption. They are often deployed in corporate environments, but for public deployment, a simple user name and password pair is more practical. The following table is a comparison of the features of authentication types.
ZyXEL NWD-370N User’s Guide TKIP uses 128-bit keys that are dynamically generated and distributed by the authentication server. AES (Advanced Encryption Standard) is a block cipher that uses a 256-bit mathematical algorithm called Rijndael. They both include a per-packet key mixing function, a Message Integrity Check (MIC) named Michael, an extended initialization vector (IV) with sequencing rules, and a re-keying mechanism.
ZyXEL NWD-370N User’s Guide WPA(2)-PSK Application Example A WPA(2)s-PSK application looks as follows. 1 First enter identical passwords into the AP and all wireless clients. The Pre-Shared Key (PSK) must consist of between 8 and 63 ASCII characters or 64 hexadecimal characters (including spaces and symbols). 2 The AP checks each client's password and (only) allows it to join the network if it matches its password. 3 The AP and wireless clients use the pre-shared key to generate a common PMK.
ZyXEL NWD-370N User’s Guide Figure 53 WPA(2) with RADIUS Application Example Security Parameters Summary Refer to this table to see what other security parameters you should configure for each Authentication Method/ key management protocol type. MAC address filters are not dependent on how you configure these security features. Table 30 Wireless Security Relational Matrix AUTHENTICATION ENCRYPTION ENTER METHOD/ KEY METHOD MANUAL KEY MANAGEMENT PROTOCOL IEEE 802.
ZyXEL NWD-370N User’s Guide APPENDIX D Setting up Your Computer’s IP Address All computers must have a 10M or 100M Ethernet adapter card and TCP/IP installed. Windows 98/Me/2000/XP and later operating systems and all versions of UNIX/LINUX include the software components you need to install and use TCP/IP on your computer. Windows 3.1 requires the purchase of a third-party TCP/IP application package. TCP/IP should already be installed on computers using Windows 2000 and XP.
ZyXEL NWD-370N User’s Guide Figure 54 WIndows 98/Me: Network: Configuration Installing Components The Network window Configuration tab displays a list of installed components. You need a network adapter, the TCP/IP protocol and Client for Microsoft Networks. If you need the adapter: 1 In the Network window, click Add. 2 Select Adapter and then click Add. 3 Select the manufacturer and model of your network adapter and then click OK. If you need TCP/IP: 1 In the Network window, click Add.
ZyXEL NWD-370N User’s Guide 3 Select Microsoft from the list of manufacturers. 4 Select Client for Microsoft Networks from the list of network clients and then click OK. 5 Restart your computer so the changes you made take effect. Configuring 1 In the Network window Configuration tab, select your network adapter's TCP/IP entry and click Properties 2 Click the IP Address tab. • • If your IP address is dynamic, select Obtain an IP address automatically.
ZyXEL NWD-370N User’s Guide Figure 56 Windows 98/Me: TCP/IP Properties: DNS Configuration 4 Click the Gateway tab. • • If you do not know your gateway’s IP address, remove previously installed gateways. If you have a gateway IP address, type it in the New gateway field and click Add. 5 Click OK to save and close the TCP/IP Properties window. 6 Click OK to close the Network window. Insert the Windows CD if prompted. 7 Restart your computer when prompted. Verifying Settings 1 Click Start and then Run.
ZyXEL NWD-370N User’s Guide Figure 57 Windows XP: Start Menu 2 For Windows XP, click Network Connections. For Windows 2000, click Network and Dial-up Connections. Figure 58 Windows XP: Control Panel 3 Right-click Local Area Connection and then click Properties.
ZyXEL NWD-370N User’s Guide Figure 59 Windows XP: Control Panel: Network Connections: Properties 4 Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties. Figure 60 Windows XP: Local Area Connection Properties 5 The Internet Protocol TCP/IP Properties window opens (the General tab in Windows XP). • 82 If you have a dynamic IP address click Obtain an IP address automatically.
ZyXEL NWD-370N User’s Guide • If you have a static IP address click Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields. Click Advanced. Figure 61 Windows XP: Advanced TCP/IP Settings 6 If you do not know your gateway's IP address, remove any previously installed gateways in the IP Settings tab and click OK. Do one or more of the following if you want to configure additional IP addresses: • • • • • • • • In the IP Settings tab, in IP addresses, click Add.
ZyXEL NWD-370N User’s Guide • • Click Obtain DNS server address automatically if you do not know your DNS server IP address(es). If you know your DNS server IP address(es), click Use the following DNS server addresses, and type them in the Preferred DNS server and Alternate DNS server fields. If you have previously configured DNS servers, click Advanced and then the DNS tab to order them.
ZyXEL NWD-370N User’s Guide Index A About 53 About your ZyXEL AG-220 19 Access point (AP) 31 Access point. See also AP. ACT LED 20 Activating a profile 49 Adapter 50 Ad-Hoc 21, 47 Advanced Encryption Standard 34, 73 Advanced settings 50 AP See also access point.
ZyXEL NWD-370N User’s Guide G N Getting started 19 Graphics icons key 18 Network mode 36 Network name 36 Network overlap 31 Network scan 44 Network type 36, 38 H Hardware connections 22 Help 23 Humidity 57 O Online help 23 Output power 57 I IEEE 802.
ZyXEL NWD-370N User’s Guide Radio specifications 57 RADIUS 33, 34 RADIUS server 74 Real-time data traffic statistics 37 Receive rate 36 Registration product 7 Related Documentation 17 S Safety warnings 6 Save power 51 Scan 37 Scan Info 47 Search 37 Security 32, 36, 58 data encryption 32 parameters 76 Sensitivity 58 Service Set Identity (SSID) 25, 31 Signal strength 37, 38 Site information 38 Site survey 37 scan 38 security settings 39 Sleep mode 51 SSID 25, 31, 36, 38, 56 Statistics 36 Support CD 17 Synta
ZyXEL NWD-370N User’s Guide WPA2 33, 41, 73 WPA2-Pre-Shared Key 34, 73 WPA2-PSK 34, 40, 73 WPA-PSK 34, 40, 73 WZC (Wireless Zero Configuration) 22 Z ZyXEL Utility 22 accessing 23 driver version number 53 exiting 22 help 23 reactivating 23 status 22 system tray icon 22 upgrading 54 version number 53 88 Index
