User`s guide

Chapter 7 Access Point Mode

NBG6616 User’s Guide

First DNS Server

Second DNS Server

Third DNS Server

Select Obtained From ISP if your ISP dynamically assigns DNS server information

(and the NBG6616's WAN IP address). The field to the right displays the (read-

only) DNS server IP address that the ISP assigns.

Select User-Defined if you have the IP address of a DNS server. Enter the DNS

server's IP address in the field to the right. If you chose User-Defined, but leave

the IP address set to 0.0.0.0, User-Defined changes to None after you click

Apply. If you set a second choice to User-Defined, and enter the same IP

address, the second User-Defined changes to None after you click Apply.

Select None if you do not want to configure DNS servers. If you do not configure a

DNS server, you must know the IP address of a computer in order to access it.

Apply Click Apply to save your changes to the NBG6616.

Cancel Click Cancel to reload the previous configuration for this screen.

Table 22 Network > LAN > IP (continued)

LABEL DESCRIPTION