User`s guide

Chapter 7 Easy Mode
NBG5715 User’s Guide
53
The following table describes the labels in this screen.
7.6 Status Screen in Easy Mode
In the Network Map screen, click Status to view read-only information about the NBG5715.
Figure 30 Status Screen in Easy Mode
The following table describes the labels in this screen.
Table 18 Wireless Security: WPS
LABEL DESCRIPTION
Wireless Security Click this to go back to the Wireless Security screen.
WPS Create a secure wireless network simply by pressing a button.
The NBG5715 scans for a WPS-enabled device within the range and performs
wireless security information synchronization.
Note: After you click the WPS button on this screen, you have to press a similar
button in the wireless station utility within 2 minutes. To add the second
wireless station, you have to press these buttons on both device and the
wireless station again after the first 2 minutes.
Register Create a secure wireless network simply by entering a wireless client's PIN
(Personal Identification Number) in the NBG5715’s interface and pushing this
button.
Type the same PIN number generated in the wireless station’s utility. Then click
Register to associate to each other and perform the wireless security
information synchronization.
Exit Click Exit to close this screen.
Table 19 Status Screen in Easy Mode
ITEM DESCRIPTION
Name This is the name of the NBG5715 in the network. You can change this in
the Maintenance > General screen in Section 22.3 on page 163.
Time This is the current system date and time.
The date is in YYYY:MM:DD (Year-Month-Day) format. The time is in
HH:MM:SS (Hour:Minutes:Seconds) format.
WAN IP This is the IP address of the WAN port.
MAC Address This is the MAC address of the NBG5715.