User`s guide

NBG5715 User’s Guide 179
APPENDIX A
Product Specifications
The following tables summarize the NBG5715’s hardware and firmware features.
Table 73 Hardware Features
Dimensions 213.7 mm (W) x 164 mm (D) x 73.6 mm (H)
Weight 251g
SDRAM 128 MB
Flash Memory 128 MB
Power Specification Input: 100~240AC, 50/60Hz, 0.8A
Output: 12V 2A
Ethernet ports Auto-negotiating: 100 Mbps, 1000 Mbps in either half-duplex or full-
duplex mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
Built-in Switch A combination of switch and router makes your NBG5715 a cost-effective
and viable network solution. You can add up to two computers to the
NBG5715 without the cost of a hub when connecting to the Internet
through the WAN port. You can add up to three computers to the NBG5715
when you connect to the Internet in AP mode. Add more than four
computers to your LAN by using a hub.
LEDs Power, LAN1-4, WAN, Internet, WLAN_2.4G, WLAN 5G, WPS, USB1-2
LED On/Off Switch One LED On/Off switch to control the LEDs.
Reset button The reset button is built into the rear panel. Use this button to restore the
NBG5715 to its factory default settings. Press for 1 second to restart the
device. Press for 5 seconds to restore to factory default settings.
WPS button Press the WPS on two WPS enabled devices within 120 seconds for a
security-enabled wireless connection.
Power switch Turn on or turn off the power of the NBG5715 using this switch.
WLAN switch Turn on or turn off the 2.4G and 5G wireless function by using this switch.
Antenna The NBG5715 is equipped with three 2dBi (2.4GHz and 5GHz) detachable
antenna to provide clear radio transmission and reception on the wireless
network.
USB Port The NBG5715 has two built-in USB 2.0 type A for USB device connectivity.
Operation Environment Temperature: 0º C ~ 45º C / 32ºF ~113ºF
Humidity: 10% ~ 90%
Storage Environment Temperature: -40º C ~ 70º C / -40ºF ~ 158ºF
Humidity: 10% ~ 95%