User`s guide

NBG5715 User’s Guide 152
CHAPTER 20
Remote Management
20.1 Overview
This chapter provides information on the Remote Management screens.
Remote Management allows you to manage your NBG5715 from a remote location through the
following interfaces:
•LAN and WAN
•LAN only
•WAN only
Note: The NBG5715 is managed using the Web Configurator.
20.2 What You Can Do in this Chapter
•Use the WWW screen to define the interface/s from which the NBG5715 can be managed
remotely using the web and specify a secure client that can manage the NBG5715 (Section 20.4
on page 153) .
•Use the TELNET screen to define the interface/s from which the NBG5715 can be managed
remotely using Telnet service and specify a secure client that can manage the NBG5715 (Section
20.5 on page 154).
20.3 What You Need to Know
Remote management over LAN or WAN will not work when:
1 The IP address in the Secured Client IP Address field (Section 20.4 on page 153) does not match
the client IP address. If it does not match, the NBG5715 will disconnect the session immediately.
2 There is already another remote management session. You may only have one remote
management session running at one time.
3 There is a firewall rule that blocks it.
20.3.1 Remote Management and NAT
When NAT is enabled: