User`s guide

Chapter 13 DHCP Server
NBG5715 User’s Guide
102
Note: You can also view a read-only client list by clicking the DHCP Table (Details...)
hyperlink in the Status screen.
Figure 59 Network > DHCP Server > Client List
The following table describes the labels in this screen.
Table 42 Network > DHCP Server > Client List
LABEL DESCRIPTION
# This is the index number of the host computer.
Status This field displays whether the connection to the host computer is up (a yellow bulb)
or down (a gray bulb).
Host Name This field displays the computer host name.
IP Address This field displays the IP address relative to the # field listed above.
MAC Address This field shows the MAC address of the computer with the name in the Host Name
field.
Every Ethernet device has a unique MAC (Media Access Control) address which
uniquely identifies a device. The MAC address is assigned at the factory and consists
of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
Reserve Select this if you want to reserve the IP address for this specific MAC address.
Apply Click Apply to save your changes back to the NBG5715.
Reset Click Cancel to reload the previous configuration for this screen.