User`s guide

Chapter 6 AP Controller Mode (NWA-3160 Only)
ZyXEL NWA-3160 Series User’s Guide
87
When the ZyXEL Device is in AP controller mode, click SSID Information in the Status
screen. The following screen displays.
Figure 50 SSID Information
The following table describes the labels in this screen.
6.2 Navigation Bar
When the ZyXEL Device is in AP controller mode, the navigation bar on the left of the web
configurator screen is different from standalone mode.
Figure 51 AP Controller: Links
The following table describes the labels in the navigation bar.
Table 16 AP Association List
LABEL DESCRIPTION
SSID This displays the SSID (Service Set IDentifier) that identifies your wireless
network. Each AP may use a different SSID (or different multiple SSIDs).
Security Mode This displays the type of security used by the wireless network. A
network’s security settings are the same regardless of the AP on which it is
running.
Stations This displays the number of wireless clients using the wireless network.
Table 17 Navigation Bar Labels
LABEL DESCRIPTION
STATUS Click this to go to the Status screen (see Section 4.1 on page 75).
MGNT MODE Click this to go to the Management Mode screen (see Section 5.2 on page
81).
These links configure
all CAPWAP-managed
access points.
These links configure
only the AP controller.