User`s guide

Chapter 4 Status Screens
ZyXEL NWA-3160 Series User’s Guide
77
System Resources
Flash This field displays the amount of the ZyXEL Device’s flash memory
currently in use. The flash memory is used to store firmware and SSID
profiles.
Memory This field displays what percentage of the ZyXEL Device’s volatile memory
is currently in use. The higher the memory usage, the more likely the
ZyXEL Device is to slow down. Some memory is required just to start the
ZyXEL Device and to run the web configurator.
CPU This field displays what percentage of the ZyXEL Device’s processing
ability is currently being used. The higher the CPU usage, the more likely
the ZyXEL Device is to slow down.
WLAN Associations This field displays the number of wireless clients currently associated with
the wireless module. Each wireless module supports up to 128 concurrent
associations.
Interface Status
Interface This column displays each interface of the ZyXEL Device.
Status This field indicates whether or not the ZyXEL Device is using the interface.
For each interface, this field displays Up when the ZyXEL Device is using
the interface and Down when the ZyXEL Device is not using the interface.
For the NWA-3160 and NWA-3163, this also displays the wireless channel
number(s).
Channel (NWA-3165
Only)
For the WLAN interface, this field displays the ZyXEL Device’s active
wireless channel number(s).
Rate For the LAN port this displays the port speed and duplex setting.
For the WLAN interface, it displays the downstream and upstream
transmission rate or N/A if the interface is not in use.
SSID Status
SSID This field displays the SSID(s) currently used by the wireless module.
BSSID This field displays the MAC address of the wireless adaptor.
Security This field displays the type of wireless security used by each SSID.
VLAN This field displays the VLAN ID of each SSID in use, or Disabled if the
SSID does not use VLAN.
System Status
Show Statistics Click this link to view port status and packet specific statistics. See Section
19.2.1 on page 228.
Association List Click this to see a list of wireless clients currently associated to each of the
ZyXEL Device’s wireless modules. See Section 19.3 on page 228.
Channel Usage
(NWA-3160 and
NWA-3163 only)
Click this to see which wireless channels are currently in use in the local
area. See Section 19.4 on page 229.
Logs Click this to see a list of logs produced by the ZyXEL Device. See Section
17.1 on page 201.
Rogue AP List
(NWA-3160 and
NWA-3163 only)
Click this to see a list of unauthorized access points in the local area. See
Section 13.3.3 on page 163.
Table 10 The Status Screen
LABEL DESCRIPTION