User`s guide

Chapter 4 Status Screens
ZyXEL NWA-3160 Series User’s Guide
76
Figure 42 The Status Screen
The following table describes the labels in this screen.
Table 10 The Status Screen
LABEL DESCRIPTION
Automatic Refresh
Interval
Enter how often you want the ZyXEL Device to update this screen.
Refresh Click this to update this screen immediately.
System Information
System Name This field displays the ZyXEL Device system name. It is used for
identification. You can change this in the System > General screen’s
System Name field.
Model This field displays the ZyXEL Device’s exact model name.
Firmware Version This field displays the current version of the firmware inside the device. It
also shows the date the firmware version was created. You can change the
firmware version by uploading new firmware in Maintenance > F/W
Upload.
System Up Time This field displays the elapsed time since the ZyXEL Device was turned on.
Current Date Time This field displays the date and time configured on the ZyXEL Device. You
can change this in the System > Time Setting screen.
WLAN Operating
Mode
This field displays the current operating mode of the first wireless module
(AP, Bridge / Repeater, AP + Bridge or MBSSID). You can change the
operating mode in the Wireless > Wireless screen.
Management VLAN This field displays the management VLAN ID if VLAN is active, or
Disabled if it is not active. You can enable or disable VLAN, or change the
management VLAN ID, in the VLAN > Wireless VLAN screen.
IP This field displays the current IP address of the ZyXEL Device on the
network.
LAN MAC This displays the MAC (Media Access Control) address of the ZyXEL
Device on the LAN. Every network device has a unique MAC address
which identifies it across the network.
WLAN MAC This displays the MAC address of the wireless module.