User`s guide

Chapter 11 Other Wireless Configuration
ZyXEL NWA-3160 Series User’s Guide
150
Figure 87 WIRELESS > Layer-2 Isolation Configuration Screen
The following table describes the labels in this screen.
11.3.1 Layer-2 Isolation Examples
The following section shows you example layer-2 isolation configurations on the ZyXEL
Device (A).
Table 52 WIRELESS > Layer-2 Isolation Configuration
LABEL DESCRIPTION
Profile Name Type a name to identify this layer-2 isolation profile.
Allow devices with
these MAC
addresses
These are the MAC address of a wireless client, AP, computer or router. A
wireless client associated with the ZyXEL Device can communicate with another
wireless client, AP, computer or router only if the MAC addresses of those devices
are listed in this table.
Set This is the index number of the MAC address.
MAC Address Type the MAC addresses of the wireless client, AP, computer or router that you
want to allow the associated wireless clients to have access to in these address
fields. Type the MAC address in a valid MAC address format (six hexadecimal
character pairs, for example 12:34:56:78:9a:bc).
Description Type a name to identify this device.
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.