User`s guide

Chapter 6 Wireless Configuration

NWA3550 User’s Guide

See Table 21 on page 93 for information on the other labels in this screen.

6.7.3 AP+Bridge Mode

Select AP+Bridge as the Operating Mode in the WIRELESS > Wireless screen to have the

ZyXEL Device function as a bridge and access point simultaneously. See the section on

applications for more information.

Figure 52 Wireless: AP+Bridge

See the tables describing the fields in the Access Point and Bridge/Repeater operating modes

for descriptions of the fields in this screen.

Remote Bridge MAC

Address

Type the MAC address of the peer device in a valid MAC address format, that

is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.

PSK Type a pre-shared key (PSK) from 8 to 63 case-sensitive ASCII characters

(including spaces and symbols). You must also set the peer device to use the

same pre-shared key. Each peer device can use a different pre-shared key.

Table 22 Wireless: Bridge/Repeater

LABEL DESCRIPTIONS