User`s guide

Chapter 6 Wireless Configuration

NWA3550 User’s Guide

6.6 Wireless Screen Overview

The following is a list of the wireless screens you can configure on the ZyXEL Device.

1 Configure the ZyXEL Device to operate in AP, Bridge/Repeater, AP+Bridge or

MBSSID mode in the Wireless screen. You can also select an SSID Profile in the

Wireless screen.

2 Use the SSID screens to view and edit SSID profiles.

3 Use the Security screen to configure wireless security profiles.

4 Use the RADIUS screen to configure RADIUS authentication and accounting settings.

5 Use the Layer-2 Isolation screen to prevent wireless clients associated with your

ZyXEL Device from communicating with other wireless clients, APs, computers or

routers in a network.

6 Use the MAC Filter screen to allow or restrict access to your wireless network based on

a client’s MAC address.

6.7 Configuring Wireless Settings

Click WIRELESS > Wireless. The screen varies depending upon the operating mode you

select.

6.7.1 Access Point Mode

Select Access Point as the Operating Mode to display the screen shown next.

Figure 47 Wireless: Access Point