User`s guide

Chapter 18 Introducing the SMT
NWA3550 User’s Guide
226
Figure 148 Initial Screen
18.2.2 Entering the Password
The login screen appears after you press [ENTER], prompting you to enter the password, as
shown below.
For your first login, enter the default password “1234”. As you type the password, the screen
displays an “X” for each character you type.
Bootbase Version: V1.05 | 03/23/2007 11:39:53
RAM:Size = 32 Mbytes
DRAM POST: Testing: 32608K OK
DRAM Test SUCCESS !
FLASH: AMD 32M
ZyNOS Version: V3.60(AAM.0)b1 | 02/01/2008 19:40:56
Press any key to enter debug mode within 3 seconds.
..........................................................
..
Copyright (c) 1994 - 2007 ZyXEL Communications Corp.
initialize ch =0, ethernet address: 00:13:49:DF:42:A8
initialize ch =1, ethernet address: 00:13:49:DF:42:A8
initialize ch =2, ethernet address: 00:13:49:DF:42:A9
initialize ch =3, ethernet address: 06:13:49:DF:42:A8
initialize ch =4, ethernet address: 0A:13:49:DF:42:A8
initialize ch =5, ethernet address: 0E:13:49:DF:42:A8
initialize ch =6, ethernet address: 12:13:49:DF:42:A8
initialize ch =7, ethernet address: 16:13:49:DF:42:A8
initialize ch =8, ethernet address: 1A:13:49:DF:42:A8
initialize ch =9, ethernet address: 1E:13:49:DF:42:A8
initialize ch =10, ethernet address: 06:13:49:DF:42:A9
initialize ch =11, ethernet address: 0A:13:49:DF:42:A9
initialize ch =12, ethernet address: 0E:13:49:DF:42:A9
initialize ch =13, ethernet address: 12:13:49:DF:42:A9
initialize ch =14, ethernet address: 16:13:49:DF:42:A9
initialize ch =15, ethernet address: 1A:13:49:DF:42:A9
initialize ch =16, ethernet address: 1E:13:49:DF:42:A9
initialize ch =17, ethernet address: 00:13:49:DF:42:A8
initialize ch =18, ethernet address: 00:13:49:DF:42:A8
initialize ch =19, ethernet address: 00:13:49:DF:42:A8
initialize ch =20, ethernet address: 00:13:49:DF:42:A8
initialize ch =21, ethernet address: 00:13:49:DF:42:A8
initialize ch =22, ethernet address: 00:13:49:DF:42:A9
initialize ch =23, ethernet address: 00:13:49:DF:42:A9
initialize ch =24, ethernet address: 00:13:49:DF:42:A9
initialize ch =25, ethernet address: 00:13:49:DF:42:A9
initialize ch =26, ethernet address: 00:13:49:DF:42:A9
Press ENTER to continue...