User`s guide

Chapter 15 Log Screens
NWA3550 User’s Guide
188
15.2 Configuring Log Settings
To change your ZyXEL Device’s log settings, click LOGS > Log Settings. The screen
appears as shown.
Use the Log Settings screen to configure to where and when the ZyXEL Device is to send the
logs and which logs and/or immediate alerts it is to send.
An alert is a type of log that warrants more serious attention. Some categories such as System
Errors consist of both logs and alerts. You may differentiate them by their color in the View
Log screen. Alerts are displayed in red and logs are displayed in black.
Source This field lists the source IP address and the port number of the incoming
packet.
Destination This field lists the destination IP address and the port number of the incoming
packet.
Notes This field displays additional information about the log entry.
Email Log Now Click Email Log Now to send the log screen to the e-mail address specified in
the Log Settings page.
Refresh Click Refresh to renew the log screen.
Clear Log Click Clear Log to clear all the logs.
Table 63 View Log
LABEL DESCRIPTION