User`s guide

Chapter 11 Rogue AP
NWA3550 User’s Guide
141
Figure 79 ROGUE AP > Friendly AP
The following table describes the labels in this screen.
11.3.3 Rogue AP List
This list displays details of all IEEE 802.11a/b/g wireless access points within the ZyXEL
Device’s coverage area, except for the ZyXEL Device itself and the access points included in
the friendly AP list (see Section 11.3.2 on page 140).
You can set how often you want the ZyXEL Device to scan for rogue APs in the ROGUE AP
> Configuration screen (see Section 11.3.1 on page 139).
Click ROGUE AP > Rogue AP. The following screen displays.
Table 43 ROGUE AP > Friendly AP
LABEL DESCRIPTION
Add Friendly AP Use this section to manually add a wireless access point to the list. You
must know the device’s MAC address.
MAC Address Enter the MAC address of the AP you wish to add to the list.
Description Enter a short, explanatory description identifying the AP with a maximum of
32 alphanumeric characters. Spaces, underscores (_) and dashes (-) are
allowed.
Add Click this button to include the AP in the list.
Friendly AP List This is the list of safe wireless access points you have already configured.
# This is the index number of the AP’s entry in the list.
MAC Address This field displays the Media Access Control (MAC) address of the AP. All
wireless devices have a MAC address that uniquely identifies them.
SSID This field displays the Service Set IDentifier (also known as the network
name) of the AP.
Channel This field displays the wireless channel the AP is currently using.
Security This field displays the type of wireless encryption the AP is currently using.
Last Seen This field displays the last time the ZyXEL Device scanned for the AP.
Description This is the description you entered when adding the AP to the list.
Delete Click this button to remove an AP’s entry from the list.