User`s guide

NWA5120 Series User’s Guide 91
CHAPTER 9
MON Profile
9.1 Overview
This screen allows you to set up monitor mode configurations that allow your NWA to scan for other
wireless devices in the vicinity. Once detected, you can use the Wireless > MON Mode screen
(Section 6.3 on page 55) to classify them as either rogue or friendly.
9.1.1 What You Can Do in this Chapter
The MON Profile screen (Section 9.2 on page 91) creates preset monitor mode configurations that
can be used by the NWA.
9.2 MON Profile
This screen allows you to create monitor mode configurations that can be used by the APs. To
access this screen, login to the Web Configurator, and click Configuration > Object > MON
Profile.
Figure 51 Configuration > Object > MON Profile
The following table describes the labels in this screen.
Table 44 Configuration > Object > MON Profile
LABEL DESCRIPTION
Add Click this to add a new monitor mode profile.
Edit Click this to edit the selected monitor mode profile.
Remove Click this to remove the selected monitor mode profile.
Activate To turn on an entry, select it and click Activate.