User`s guide

Chapter 6 Wireless
NWA5120 Series User’s Guide
60
6.5 DCS
Use this screen to configure dynamic radio channel selection. Click Configuration > Wireless >
DCS to access this screen.
Figure 32 Configuration > Wireless > DCS
Each field is described in the following table.
Table 28 Configuration > Wireless > DCS
LABEL DESCRIPTION
Enable Dynamic
Channel Selection
Select this to have the NWA automatically select the radio channel upon which it
broadcasts by scanning the area around it and determining what channels are currently
being used by other devices.
DCS Time Interval Enter a number of minutes. This regulates how often the NWA surveys the other APs
within its broadcast radius. If the channel on which it is currently broadcasting suddenly
comes into use by another AP, the NWA will then dynamically select the next available
clean channel or a channel with lower interference.