User`s guide

NWA5120 Series User’s Guide 53
CHAPTER 6
Wireless
6.1 Overview
This chapter discusses how to configure the wireless network settings in your NWA.
The following figure provides an example of a wireless network.
Figure 25 Example of a Wireless Network
The wireless network is the part in the blue circle. In this wireless network, devices A and B are
called wireless clients. The wireless clients use the access point (AP) to interact with other devices
(such as the printer) or with the Internet. Your NWA is the AP.
6.1.1 What You Can Do in this Chapter
•The AP Management screen (Section 6.2 on page 54) manages the NWA’s general wireless
settings.
•The MON Mode screen (Section 6.3 on page 55) allows you to assign APs either to the rogue AP
list or the friendly AP list.
•The Load Balancing screen (Section 6.4 on page 57) configures network traffic load balancing
between the APs and the NWA.
•The DCS screen (Section 6.5 on page 60) configures dynamic radio channel selection.