User`s guide

Chapter 5 LAN Setting
NWA5120 Series User’s Guide
52
5.2 LAN Setting
Use this screen to configure the IP address for your NWA. To access this screen, click
Configuration > LAN Setting.
Figure 24 Configuration > LAN Setting
Each field is described in the following table.
Table 23 Configuration > LAN Setting
LABEL DESCRIPTION
IP Address
Assignment
Get
Automatically
Select this to make the interface a DHCP client and automatically get the IP address,
subnet mask, and gateway address from a DHCP server.
Use Fixed IP
Address
Select this if you want to specify the IP address, subnet mask, and gateway manually.
IP Address Enter the IP address for this interface.
Subnet Mask Enter the subnet mask of this interface in dot decimal notation. The subnet mask
indicates what part of the IP address is the same for all computers in the network.
Gateway Enter the IP address of the gateway. The NWA sends packets to the gateway when it
does not know how to route the packet to its destination. The gateway should be on the
same network as the interface.
VLAN Settings
Management
VLAN ID
Enter a VLAN ID for the NWA.
As Native VLAN Select this option to treat this VLAN ID as a VLAN created on the NWA and not one
assigned to it from outside the network.
Apply Click Apply to save your changes back to the NWA.
Reset Click Reset to return the screen to its last-saved settings.