User`s guide

Chapter 12 Log and Report
NWA5120 Series User’s Guide
141
12.3 Log Setting
These screens control log messages and alerts. A log message stores the information for viewing
(for example, in the Monitor > View Log screen) or regular e-mailing later, and an alert is e-
mailed immediately. Usually, alerts are used for events that require more serious attention, such as
system errors and attacks.
The NWA provides a system log and supports e-mail profiles and remote syslog servers. The system
log is available on the View Log screen, the e-mail profiles are used to mail log messages to the
specified destinations, and the other four logs are stored on specified syslog servers.
The Log Setting tab also controls what information is saved in each log. For the system log, you
can also specify which log messages are e-mailed, where they are e-mailed, and how often they are
e-mailed.
For alerts, the Log Setting screen controls which events generate alerts and where alerts are e-
mailed.
The Log Setting screen provides a summary of all the settings. You can use the Edit Log Setting
screen to maintain the detailed settings (such as log categories, e-mail addresses, server names,
etc.) for any log. Alternatively, if you want to edit what events is included in each log, you can also
use the Active Log Summary screen to edit this information for all logs at the same time.
Mail Subject Type the subject line for the outgoing e-mail. Select Append system name to add the
NWA’s system name to the subject. Select Append date time to add the NWA’s system
date and time to the subject.
Mail From Type the e-mail address from which the outgoing e-mail is delivered. This address is used in
replies.
Mail To Type the e-mail address (or addresses) to which the outgoing e-mail is delivered.
SMTP
Authentication
Select this check box if it is necessary to provide a user name and password to the SMTP
server.
User Name This box is effective when you select the SMTP Authentication check box. Type the user
name to provide to the SMTP server when the log is e-mailed.
Password This box is effective when you select the SMTP Authentication check box. Type the
password to provide to the SMTP server when the log is e-mailed.
Send Report
Now
Click this button to have the NWA send the daily e-mail report immediately.
Time for
sending report
Select the time of day (hours and minutes) when the log is e-mailed. Use 24-hour notation.
Report Items Select the information to include in the report. Select Reset counters after sending
report successfully if you only want to see statistics for a 24 hour period.
Reset All
Counters
Click this to discard all report data and start all of the counters over at zero.
Apply Click Apply to save your changes back to the NWA.
Reset Click Reset to return the screen to its last-saved settings.
Table 63 Configuration > Log & Report > Email Daily Report (continued)
LABEL DESCRIPTION