User`s guide

Chapter 11 System
NWA5120 Series User’s Guide
133
11.7 FTP
You can upload and download the NWA’s firmware and configuration files using FTP. To use this
feature, your computer must have an FTP client. See Chapter 13 on page 151 for more information
about firmware and configuration files.
To change your NWA’s FTP settings, click Configuration > System > FTP tab. The screen appears
as shown. Use this screen to specify FTP settings.
Figure 78 Configuration > System > FTP
The following table describes the labels in this screen.
11.8 SNMP
Simple Network Management Protocol is a protocol used for exchanging management information
between network devices. Your NWA supports SNMP agent functionality, which allows a manager
station to manage and monitor the NWA through the network. The NWA supports SNMP version one
Table 59 Configuration > System > FTP
LABEL DESCRIPTION
Enable Select the check box to allow or disallow the computer with the IP address that matches
the IP address(es) in the Service Control table to access the NWA using this service.
TLS required Select the check box to use FTP over TLS (Transport Layer Security) to encrypt
communication.
This implements TLS as a security mechanism to secure FTP clients and/or servers.
Server Port You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Server
Certificate
Select the certificate whose corresponding private key is to be used to identify the NWA for
FTP connections. You must have certificates already configured in the My Certificates
screen.
Apply Click Apply to save your changes back to the NWA.
Reset Click Reset to return the screen to its last-saved settings.