user manual

NWA3000-N Series User’s Guide
263
CHAPTER 19
Reboot
19.1 Overview
Use this to restart the device.
19.1.1 What You Need To Know
If you applied changes in the Web configurator, these were saved automatically
and do not change when you reboot. If you made changes in the CLI, however,
you have to use the write command to save the configuration before you reboot.
Otherwise, the changes are lost when you reboot.
Reboot is different to reset; reset returns the device to its default configuration.
19.2 Reboot
This screen allows remote users can restart the device. To access this screen, click
Maintenance > Reboot.
Figure 123 Maintenance > Reboot
Click the Reboot button to restart the NWA3000-N series AP. Wait a few minutes
until the login screen appears. If the login screen does not appear, type the IP
address of the device in your Web browser.
You can also use the CLI command reboot to restart the NWA3000-N series AP.