user manual

Chapter 18 Diagnostics
NWA3000-N Series User’s Guide
259
Note: New capture files overwrite existing files of the same name. Change the File
Suffix field’s setting to avoid this.
Figure 121 Maintenance > Diagnostics > Wireless Frame Capture > Capture
The following table describes the labels in this screen.
Table 94 Maintenance > Diagnostics > Wireless Frame Capture > Capture
LABEL DESCRIPTION
AP Operating Mode This section appears when the NWA3000-N series AP is set to the
standalone AP mode.
Wireless Radio 1
operating mode
This field shows whether the radio is set to function as an AP or a
monitor.
Please configure
at least one radio
to MON mode.
Click this to go the Configuration > Wireless > AP
Management screen, where you can set a radio to monitor mode.
MON Mode APs This section appears when the NWA3000-N series AP is set to the
controller mode.
Configure AP to
MON Mode
Click this to go the Configuration > Wireless > AP
Management screen, where you can set one or more APs to
monitor mode.
Available MON
Mode APs
This column displays which APs on your wireless network are
currently configured for monitor mode.
Use the arrow buttons to move APs off this list and onto the
Captured MON Mode APs list.
Capture MON
Mode APs
This column displays the monitor-mode configured APs selected to
for wireless frame capture.
Misc Setting