user manual

Chapter 16 Log and Report
NWA3000-N Series User’s Guide
240
Log Category This field displays each category of messages. It is the same value used
in the Display and Category fields in the View Log tab. The Default
category includes debugging messages generated by open source
software.
System log Select which events you want to log by Log Category. There are three
choices:
disable all logs (red X) - do not log any information from this category
enable normal logs (green checkmark) - create log messages and
alerts from this category
enable normal logs and debug logs (yellow check mark) - create log
messages, alerts, and debugging information from this category; the
NWA3000-N series AP does not e-mail debugging information, however,
even if this setting is selected.
E-mail Server
1 E-mail
Select whether each category of events should be included in the log
messages when it is e-mailed (green check mark) and/or in alerts (red
exclamation point) for the e-mail settings specified in E-Mail Server 1.
The NWA3000-N series AP does not e-mail debugging information, even
if it is recorded in the System log.
E-mail Server
2 E-mail
Select whether each category of events should be included in log
messages when it is e-mailed (green check mark) and/or in alerts (red
exclamation point) for the e-mail settings specified in E-Mail Server 2.
The NWA3000-N series AP does not e-mail debugging information, even
if it is recorded in the System log.
Remote Server
1~4
For each remote server, select what information you want to log from
each Log Category (except All Logs; see below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green checkmark) - log regular information and
alerts from this category
enable normal logs and debug logs (yellow check mark) - log regular
information, alerts, and debugging information from this category
OK Click this to save your changes and return to the previous screen.
Cancel Click this to return to the previous screen without saving your changes.
Table 86 Configuration > Log & Report > Log Setting > Active Log Summary
LABEL DESCRIPTION