user manual

Chapter 15 System
NWA3000-N Series User’s Guide
195
To change your NWA3000-N series AP’s time based on your local time zone and
date, click Configuration > System > Date/Time. The screen displays as
shown. You can manually set the NWA3000-N series AP’s time and date or have
the NWA3000-N series AP get the date and time from a time server.
Figure 85 Configuration > System > Date/Time
The following table describes the labels in this screen.
Table 70 Configuration > System > Date/Time
LABEL DESCRIPTION
Current Time and
Date
Current Time This field displays the present time of your NWA3000-N series AP.
Current Date This field displays the present date of your NWA3000-N series AP.
Time and Date
Setup
Manual Select this radio button to enter the time and date manually. If you
configure a new time and date, time zone and daylight saving at the
same time, the time zone and daylight saving will affect the new time
and date you entered. When you enter the time settings manually, the
NWA3000-N series AP uses the new setting once you click Apply.
New Time (hh-
mm-ss)
This field displays the last updated time from the time server or the
last time configured manually.
When you set Time and Date Setup to Manual, enter the new time
in this field and then click Apply.