user manual

NWA3000-N Series User’s Guide
193
CHAPTER 15
System
15.1 Overview
Use the system screens to configure general NWA3000-N series AP settings.
15.1.1 What You Can Do in this Chapter
•The Host Name screen (Section 15.2 on page 194) configures a unique name
for the NWA3000-N series AP in your network.
•The Date/Time screen (Section 15.3 on page 194) configures the date and
time for the NWA3000-N series AP.
•The Console Speed screen (Section 15.4 on page 199) configures the console
port speed when you connect to the NWA3000-N series AP via the console port
using a terminal emulation program.
•The WWW screens (Section 15.5 on page 200) configure settings for HTTP or
HTTPS access to the NWA3000-N series AP.
•The SSH screen (Section 15.6 on page 209) configures SSH (Secure SHell) for
securely accessing the NWA3000-N series AP’s command line interface.
•The Telnet screen (Section 15.7 on page 214) configures Telnet for accessing
the NWA3000-N series AP’s command line interface.
•The FTP screen (Section 15.8 on page 215) specifies FTP server settings. You
can upload and download the NWA3000-N series AP’s firmware and
configuration files using FTP. Please also see Chapter 17 on page 241 for more
information about firmware and configuration files.
•The SNMP screens (Section 15.9 on page 217) configure the device’s SNMP
settings, including profiles that define allowed SNMPv3 access.
•The Auth. Server screens (Section 15.10 on page 221) configure settings for
the NWA3000-N series AP’s built-in authentication server.