user manual

Chapter 14 Certificates
NWA3000-N Series User’s Guide
175
14.2 My Certificates
Click Configuration > Object > Certificate > My Certificates to open this
screen. This is the NWA3000-N series AP’s summary list of certificates and
certification requests.
Figure 77 Configuration > Object > Certificate > My Certificates
The following table describes the labels in this screen.
Table 62 Configuration > Object > Certificate > My Certificates
LABEL DESCRIPTION
PKI Storage
Space in Use
This bar displays the percentage of the NWA3000-N series AP’s PKI
storage space that is currently in use. When the storage space is almost
full, you should consider deleting expired or unnecessary certificates
before adding more certificates.
Add Click this to go to the screen where you can have the NWA3000-N
series AP generate a certificate or a certification request.
Edit Double-click an entry or select it and click Edit to open a screen with an
in-depth list of information about the certificate.
Remove The NWA3000-N series AP keeps all of your certificates unless you
specifically delete them. Uploading a new firmware or default
configuration file does not delete your certificates. To remove an entry,
select it and click Remove. The NWA3000-N series AP confirms you
want to remove it before doing so. Subsequent certificates move up by
one when you take this action.
Object
References
You cannot delete certificates that any of the NWA3000-N series AP’s
features are configured to use. Select an entry and click Object
References to open a screen that shows which settings use the entry.
# This field displays the certificate index number. The certificates are
listed in alphabetical order.
Name This field displays the name used to identify this certificate. It is
recommended that you give each certificate a unique name.