user manual

Chapter 9 Wireless
NWA3000-N Series User’s Guide
115
9.3.1 Edit AP List
Select an AP and click the Edit button in the Configuration > Wireless > AP
Management table to display this screen. Use this screen to set the managed
AP’s general wireless settings.
Figure 46 Configuration > Wireless > Edit AP List
Each field is described in the following table.
Table 39 Configuration > Wireless > Edit AP List
LABEL DESCRIPTION
Create new
Object
Use this menu to create a new Radio or SSID object to associate
with this AP.
MAC Address This displays the MAC address of the selected AP.
Model This field displays the AP’s hardware model information. It displays
“N/A” (not applicable) only when the AP disconnects from the
NWA3000-N series AP and the information is unavailable as a result.
Description Enter a description for this AP. You can use up to 31 characters,
spaces and underscores allowed.