user manual

Chapter 6 Monitor
NWA3000-N Series User’s Guide
101
Log File Status This indicates the status of the AP’s log messages.
Last Log Query
Time
This indicates the last time the AP was queried for its log messages.
Display Select the log file from the specified AP that you want displayed.
Note: This criterion only appears when you Show Filter.
Priority Select a priority level to use for filtering displayed log messages.
Note: This criterion only appears when you Show Filter.
Source
Address
Enter a source IP address to display only the log messages that include
it.
Note: This criterion only appears when you Show Filter.
Destination
Address
Enter a destination IP address to display only the log messages that
include it.
Note: This criterion only appears when you Show Filter.
Source
Interface
Enter a source interface to display only the log messages that include it.
Note: This criterion only appears when you Show Filter.
Destination
Interface
Enter a destination interface to display only the log messages that
include it.
Note: This criterion only appears when you Show Filter.
Keyword Enter a keyword to display only the log messages that include it.
Note: This criterion only appears when you Show Filter.
Protocol Select a protocol to display only the log messages that include it.
Note: This criterion only appears when you Show Filter.
Search Click this to start the log query based on the selected criteria. If no
criteria have been selected, then this displays all log messages for the
specified AP regardless.
Email Log Now Click this open a new e-mail in your default e-mail program with the
selected log attached.
Refresh Click this to refresh the log table.
Clear Log Click this to clear the log on the specified AP.
# This field is a sequential value, and it is not associated with a specific log
message.
Time This indicates the time that the log messages was created or recorded
on the AP.
Priority This indicates the selected log message’s priority.
Category This indicates the selected log message’s category.
Message This displays content of the selected log message.
Table 32 Monitor > Log > View AP Log (continued)
LABEL DESCRIPTION