user manual

ENGLISH
6
3.2 Wireless LAN
Configure your NBG334W to support a wireless network by following these steps.
1 Enter a unique Name (SSID) to identify the NBG334W on the wireless LAN.
2 Select a wireless channel. The NBG334W and other wireless clients must use the same
channel.
3 Select Auto to automatically use WPA-PSK which provides a high level of security. See
your User’s Guide for information on other kinds of security. Click Next.
4 Write down the security key that displays in the pop-up screen. Computers on the wireless
network will need this security key to access the NBG334W. The security key is case-
sensitive so “ABCD” is not the same as “abcd”.
" Write down the security key, Name (SSID), Security and Channel
Selection for later use as the NBG334W and other devices on your
wireless network must use the same settings.
5 Click OK to continue.
3.3 WAN Connection
1 You may need to wait several minutes while the wizard attempts to detect which WAN
connection type (Ethernet, PPP over Ethernet or PPTP) you are using.
• If the wizard detects your connection type, follow the steps for your connection type as
given below.