User`s guide

NetAtlas Enterprise Ethernet Switch Manager User’s Guide
95 Chapter 11 Tools
11.1.2 Web Access
Configure the switch using the web configurator as shown.
1 Select a switch from the list of devices shown in the Device List Panel.
2 Click Tool and then Web Access to open the switch web configurator password screen.
From here you can log in directly to the switch.
3 Type the switch User name and Password to access the web configurator.
Figure 61 Web Access
4 Refer to the switch User’s Guide for information on the web configurator main screen.
11.2 Ping
Ping the host to see if the links and TCP/IP protocol on both your computer and the switch is
working. Follow the steps below:
1 Select a switch from the list of devices shown in the Device List Panel.
2 Click Too l and then Ping to have the computer ping the IP address of the selected device.
3 The Command Prompt window automatically closes after the computer pings the selected
switch three times.
Note: The device IP address varies according to whether the switch is connected to
the EMS computer using an in-band or an out-of-band IP address.