User`s guide

NetAtlas Enterprise Ethernet Switch Manager User’s Guide
39 Chapter 3 EMS Main Window
3.6 EMS Main Menu Summary
This is a summary of the EMS menus in the main screen. Screens, screen labels and fields vary
depending on your switch model.
The following table summarizes these sub-links in the navigation panel.
Table 11 EMS Menu Summary
MAP VIEW TEMPLATE PROVISIONING PERFORMANCE FAULT MAINTENANCE TOOL HELP
Add
Submap
/Device
Hardware
Status
VLAN
Templat e
IGMP Filtering
Provisioning
Interface Event Log Firmware
Upgrade
Telnet About
Edit
Node
STP
Status
IGMP
Filtering
Profile
Templat e
Loopback
Test
Device Reset Web
Access
Search
Node
VLAN
Status
Multicast
Templat e
NE (Network
Element)
Configuration
Backup and
Restore
Ping
Delete Port
Status
Load Factory
Default
Refresh 802.1d Scheduled NE
Config Backup
Exit Multicast
Status
Table 12 EMS Navigation Panel Sub-link Descriptions
DESCRIPTION LABEL
MAP Screens
Add Submap/Device This link takes you to a screen where you can add a device or a submap
folder to the EMS Device List Panel.
Edit Node This link takes you to a screen where you can edit device properties.
Search Node This link takes you to a screen where you can search for a device or a
submap folder.
Delete Click this link to delete a submap folder or devices within a folder.
Refresh Click this link to update the screen with the most recently saved settings.
View
Hardware Status This link takes you to a screen where you can view the hardware status of a
device.
STP Status This link takes you to a screen where you can view the Spanning Tree
Protocol (STP) status of a device.
VLAN Status This link takes you to a screen where you can view the VLAN status of a
device.
Port Status This link takes you to a screen where you can view the port status of a
device.