User`s guide

NetAtlas Enterprise Ethernet Switch Manager User’s Guide
Chapter 15 VLAN 130
15.2.1 Modify an 802.1Q VLAN
Ports are assigned membership in a VLAN by associating a VLAN ID with the ports.
In the VLAN screen, click New or Modify to display the following screen.
Figure 93 VLAN Configuration: 802.1Q: Modify
New Click New to create a new VLAN. You must enter a VLAN ID and a VLAN Name to
create a new VLAN. The new VLAN and name is displayed in the left-hand column in
this screen.
Delete Click on a VLAN in the left-hand column of this screen and then click the Delete
button to remove it from the VLAN template.
Modify Click on a VLAN in the left-hand column of this screen. Change the VLAN ID, VLAN
Name or change the configuration of the egress, forbidden and untagged ports. Click
the Modify button to save the changes.
Load Template Use a VLAN template to overwrite existing selected VLANs. Select one or more
VLANs and click the Load Template button. See
Section 6.2 on page 60 for more
information.
Port List Click on a port in the Egress Ports list to add the selected port to the port list. If a
port is not selected from any of the three port lists, then it is a normal tagged port.
Refer to Table 61 on page 131 for the VLAN port type descriptions.
Close Click Close to close the screen.
Table 60 VLAN Configuration: 802.1Q (continued)
LABEL DESCRIPTION