User`s guide

NetAtlas Enterprise Ethernet Switch Manager User’s Guide
129 Chapter 15 VLAN
Figure 91 Selecting a VLAN Type
4 Click Configuration and then VLAN Configuration to display the screen as shown
next.
Figure 92 VLAN Configuration: 802.1Q
The following table describes the labels in this screen.
Table 60 VLAN Configuration: 802.1Q
LABEL DESCRIPTION
VLAN ID This field displays the ID of the VLAN.
Name This field displays the name of the VLAN.
Status This field displays ACTIVE if the VLAN is active and will remain so after the next
reset of the device. This field is DynamicGVRP if the VLAN is active and will remain
so until removed by GVRP. This field is OTHER if the VLAN is active, but is not
permanent or created by GVRP.